[Fwd: Re: [ RadSafe ] MicroREM Teletector]

The Wilsons pnwnatives at gmail.com
Sat Jul 29 01:08:19 CDT 2006



-------- Original Message --------
Subject: 	Re: [ RadSafe ] MicroREM Teletector
Date: 	Fri, 28 Jul 2006 06:56:24 -0700
From: 	The Wilsons <pnwnatives at gmail.com>
To: 	Mccormick, Luke I <luke.mccormick at dhs.gov>
CC: 	radsafe at radlab.nl
References: 	<OF0C779D02.A8EC3AFB-ON852571B9.00425E51 at CUSTOMS.TREAS.GOV>



Thermo Electron has an instrument that might meet your needs

Go to      http://www.thermo.com/com/cda/product/detail/1,1055,15794,00.html

Bob Wilson

Mccormick, Luke I wrote:
> You can get a Fluke 451P pressurized Ion Chamber with a data logging cable
> (20') its not made as a teletector but could be rigged easily. If you take
> the strap off, the screw hole in the handle is the same size as a tripod
> mounting screw.
>
> ____________________Reply Separator____________________
> Subject:    [ RadSafe ] MicroREM Teletector
> Author:     radsafe-bounces at radlab.nl
> Date:       7/25/2006 6:47 PM
>
>
>
>
>        I'm trying to find a teletector that reads out in the low (0 to
>        25)
>        micro-R/hr range.  We use Bicron's MicroREM for surveys but
>        need something
>        we can stick under suspended loads.  Any suggestions on a
>        vendor?  Thanks.
>        _______________________________________________
>        You are currently subscribed to the RadSafe mailing list
>
>        Before posting a message to RadSafe be sure to have read and
>        understood the RadSafe rules. These can be found at:
>        http://radlab.nl/radsafe/radsaferules.html
>
>        For information on how to subscribe or unsubscribe and other
>        settings visit: http://radlab.nl/radsafe/
>
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
>
> Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://radlab.nl/radsafe/radsaferules.html
>
> For information on how to subscribe or unsubscribe and other settings visit: http://radlab.nl/radsafe/
>
>   



More information about the RadSafe mailing list