[ RadSafe ] Recommendations on testing unknown waste

[sstewar3 at rdg.boehringer-ingelheim.com]

Dear RadSafers,

I would appreciate your input on this matter.  We have radioactive liquid
waste, for which we know the activity and isotope, but the chemical
constituents are unknown.  My question is two-fold.  One, how would one go
about testing for the chemical constituents?  Is there a laboratory that you
would recommend?  Two, do we need to find and list each chemical component,
or can we just test the liquid by characteristic/listed traits, and ship it
as such (i.e.: Radioactive material, flammable, n.o.s)?

You feedback would be appreciated.  

Sincerely, 

Sarah Stewart

Radiation Safety Specialist
Environmental Affairs & Safety
Boehringer-Ingelheim Pharmaceuticals, Inc.
Ridgefield, CT 06877
(203) 791-6493

-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On Behalf
Of efforrer at aol.com
Sent: Wednesday, August 15, 2007 4:48 PM
To: radsafe at radlab.nl
Subject: [ RadSafe ] Re: Inquiry about storing mixed waste

Depends on where you are located.? EPA has granted so relief on disposal and
storage of mixed waste.? However California did not adopt that ruling and you
still have to treat as radioactive and hazardous.? All storage and time
limits apply to mixed waste in California.

Gene Forrer

________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from
AOL at AOL.com.
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/