AW: [ RadSafe ] Po-210

Franz Schönhofer franz.schoenhofer at chello.at
Thu Dec 20 14:53:40 CST 2007


Elain, Colin,

As mentioned in Colins message I would not bother for the use of Po-210 for
elimination of static electricity, where every precaution has been taken to
prevent any distribution of Po-210 into the environment or to the workers. 

As he mentioned any other use - especially in liquid form - I also have to
support his suggestions. Po-210 has one of the highest dose coefficients. 

Additionally it should be noted, that Po-210 occurs in drinking water and
might be a source of unacceptable doses to the population. 

Franz Schoenhofer, PhD
MinRat i.R.
Habicherg. 31/7
A-1160 Wien/Vienna
AUSTRIA


-----Ursprüngliche Nachricht-----
Von: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] Im Auftrag
von Colin Beeforth
Gesendet: Mittwoch, 19. Dezember 2007 23:56
An: radsafe at radlab.nl
Betreff: [ RadSafe ] Po-210


Hi Elaine,

You Said:

"One of the researchers here is hoping to find a supplier of 50 mCi of
Po-210, preferably in solution.  Could someone offer some insight as to
where I might start my research to procure this material?"


Po-210 is commonly available as a licensed source, in solid sealed form.
The intense alpha emissions create a cascade of neutral ionisation used
commonly to eliminate the effects of static electricity.  Typically used
in paper or plastic production, or to eliminate the pesky effects of
static in microbalances.  As a sealed source static eliminator, Po-210
is very safe and effective.  The manufacturers offer a return service
for depleted sources, so there are no storage problems.

I would suggest that your researcher may want a 50mCi sealed source to
put into a microbalance.  For this application, take a look at:
http://www.nrdstaticcontrol.com

However, if your researcher is definite about wanting Po-210 in liquid
form, please proceed with caution.

Po-210, as an intense alpha emitter, is quite risky in any dispersible
form, ie. liquid.  The slightest aerosol from this would give a very
dangerous level of alpha exposure to lungs.  Chemically, polonium is
also a serious human poison.

Given it's recent publicity, used as a poison used to kill a Russian
gentleman, it might be wise to carefully check your researcher's
application for Po-210.  Even if they have a legitimate need, it may
have to go unfulfilled.  The legal liability issues could be quite
serious, and would definitely require management level approval.

I hope this information helps.

Cheers, Colin Beeforth
Melbourne, Australia





_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/





More information about the RadSafe mailing list