[ RadSafe ] End of an Era

[Flood, John]

It is my understanding that much design and manufacturing is moving from
Santa Fe to Ohio, while calibration and repair will go to South Carolina
as stated earlier.  Some of the instruments come from the German part of
the Thermo empire, which has its own design & production, and that will
continue.  How many of the Santa Fe workforce will end up with a Thermo
job elsewhere, and how many will be laid off I couldn't even guess.

Bob Flood
Nevada Test Site



-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On
Behalf Of Sandy Perle
Sent: Monday, March 05, 2007 1:09 PM
To: 'J. Marshall Reber'; 'radsafelist'
Subject: RE: [ RadSafe ] End of an Era

Are you sure that these operations aren't being consolidated in their
new
manufacturing facility located in Oakbrook, OH? Thermo employees do
monitor
this list, so we might get some more details regarding this.

----------------------------------------------------------------
Sandy Perle 
Senior Vice President, Technical Operations 
Global Dosimetry Solutions, Inc. 
2652 McGaw Avenue
Irvine, CA 92614
 
Tel: (949) 296-2306 / (888) 437-1714 Extension 2306 
Tel: (949) 419-1000 Extension 2306
Fax:(949) 296-1144
 
Global Dosimetry Website: http://www.dosimetry.com/ 
Personal Website: http://sandy-travels.com/ 
 

-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On
Behalf
Of J. Marshall Reber
Sent: Monday, March 05, 2007 9:40 AM
To: radsafelist
Subject: [ RadSafe ] End of an Era

I've just heard that Thermo Electron (Eberline) is closing their  
Santa Fe operations.  All design, production, repair parts and  
service personnel there are being let go, many experts with more than  
30 years of service will disappear.  R&D will move to Germany, repair  
service will all be done in South Carolina.


_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood
the RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings
visit: http://radlab.nl/radsafe/