[ RadSafe ] RE: US DOT Shipment Surveys

[Alan Watts]

you might consider contacting DOT Haz Mat Info Line: 800 467 4922

--On Monday, September 08, 2008 1:41 PM -0400 Walt Cofer 
<radcontrol at embarqmail.com> wrote:

> Harry -
>
> I suggest that you take your question directly to the USDOT RAM group;
> you should contact Karen Plessas, RAM Enforcement Program Mgr.; her email
> is Karen.Plessas at dot.gov and her phone no. is (202) 366-4545.
>
> Walt Cofer
> Radiation Control, Inc.
> Tallahassee, FL
> Tel:    (850) 668-8559
> Cell:   (850) 519-5351
> Email: radcontrol at embarqmail.com
> Web:  www.rad-control.net
>
>
> ----- Original Message -----
> From: Randy Redmond (RXQ) <redmondrr at y12.doe.gov>
> To: 'Harry Reynolds' <hreynolds at energysolutions.com>, radsafe
> <radsafe at radlab.nl> Sent: Wed, 3 Sep 2008 06:42:39 -0400 (EDT)
> Subject: [ RadSafe ] RE: US DOT Shipment Surveys
>
> Harry,
>
> Please share any responses you privately receive.  I have been down this
> road and have ended up including the shallow dose in DOT shipments.
>
> Randy Redmond
> B&W Y-12
> Radiological Engineering
>
> -----Original Message-----
> From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On
> Behalf Of Harry Reynolds Sent: Tuesday, September 02, 2008 5:19 PM
> To: radsafe
> Subject: [ RadSafe ] US DOT Shipment Surveys
>
>
>  Are there any guidance documents or precedents on the wall thickness of
> instruments used for contact dose rate readings on US DOT shipments
> pursuant to 49 CRF 173?  For example if an instrument designed for deep
> dose measurements records a contact dose rate below release limits  and a
> reading with the shallow dose window open is over the limit which reading
> applies?
>
>
> Harry Reynolds
> Clive Site Health Physics
> ENERGYSOLUTIONS
> 801-649-2219
>
>
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
>
> Before posting a message to RadSafe be sure to have read and understood
> the RadSafe rules. These can be found at:
> http://radlab.nl/radsafe/radsaferules.html
>
> For information on how to subscribe or unsubscribe and other settings
> visit: http://radlab.nl/radsafe/
>
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
>
> Before posting a message to RadSafe be sure to have read and understood
> the RadSafe rules. These can be found at:
> http://radlab.nl/radsafe/radsaferules.html
>
> For information on how to subscribe or unsubscribe and other settings
> visit: http://radlab.nl/radsafe/
>
>
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
>
> Before posting a message to RadSafe be sure to have read and understood
> the RadSafe rules. These can be found at:
> http://radlab.nl/radsafe/radsaferules.html
>
> For information on how to subscribe or unsubscribe and other settings
> visit: http://radlab.nl/radsafe/