High Range Dose Rate Monitors

[Lorna Bullerwell <ljb1@cornell.edu>]

Hi all,

We are looking to replace some monitors to measure dose rate for a very 
high radiation area (>500 krad/h) which also need to function properly at 
near background levels.  They need to have the capability of tripping at 
low level radiation fields, and not get max out in the higher fields.  The 
monitor would be tied into a door-interlocking system, such that it would 
have to send a signal to the interlock that no high level radiation is 
present prior to allowing the door to be opened.  Do any of you have any 
recommendations for vendors, etc.?  Please respond to me directly, unless 
you feel this would be of interest to the whole list.  Thanks!
***********************************************************************
Any statement above is 100% my responsibility.
Don't blame Cornell!
***********************************************************************
Lorna Hubble (Bullerwell)		Phone:  (607) 255-8816
Radiological Safety Specialist	Fax:  (607) 255-8267
Cornell University			mailto:ljb1@cornell.edu
Department of Environmental Health and Safety
Laboratory and Radiation Safety Section
125 Humphreys Service Building,  Ithaca, NY  14853
http://www.ehs.cornell.edu/
************************************************************************

************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html