[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Calibration Source for 43-68 probe?

To: radsafe@list.Vanderbilt.Edu
Subject: Calibration Source for 43-68 probe?
From: Jay Beckel <jbeckel@ameslab.gov>
Date: Wed, 12 Nov 2003 15:14:19 -0600
Date: Wed, 12 Nov 2003 15:16:22 -0600
Importance: Normal
In-reply-to: <3FB208F1.12838.9B952F@localhost>
Reply-To: Jay Beckel <jbeckel@ameslab.gov>
Sender: owner-radsafe@list.Vanderbilt.Edu

What do you use for a calibration source for your Ludlum 43-68 probes if you

have them?  What are some typical detector and total efficiencies you are

coming up with?



Thanks for any help!

Jay Beckel





************************************************************************

You are currently subscribed to the Radsafe mailing list. To

unsubscribe, send an e-mail to Majordomo@list.vanderbilt.edu  Put the

text "unsubscribe radsafe" (no quote marks) in the body of the e-mail,

with no subject line. You can view the Radsafe archives at

http://www.vanderbilt.edu/radsafe/

References:
- Interest in participating on an N13 Working Group for Homeland Security Standard Development?
  - From: "Sandy Perle" <sandyfl@EARTHLINK.NET>

Prev by Date: RE: transportation event
Next by Date: Transportation event - drop test
Prev by thread: Interest in participating on an N13 Working Group for Homeland Security Standard Development?
Next by thread: FW: [srp] IRPA Code of Ethics
Index(es):
- Date
- Thread