[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Identification of a Victoreen VX96
All,
I believe it Ni-63 which was plated onto one or both electrodes in the
diode. They are glass "tubes", i.e., electronic components.
(I was RSO for the decontamination of the old Victoreen building on Woodland
Avenue in Cleveland where they were manufactured.)
Wes
Wesley R. Van Pelt, PhD, CIH, CHP
Radiation Safety & Environmental Radioactivity
Wesley R. Van Pelt Associates, Inc.
Subject: Identification of a Victoreen VX96
Dear all;
We recently found some devices that are glass tubes (about 1" tall and 1/2"
in diameter, with two connection wires extending from the bottom). The
tubes were labeled as radioactive.
The devices are also labeled "Victoreen VX-96 1000 6540" on the side of the
tube. Inside the tube there are two small disk like metal cylinders,
parallel to one another, connected to the wires (it looks like it might be
some type of diode). It arrived in a storage box labeled "neon lamps."
There are no detectable gamma dose rates (measured with a micro-R meter on
contact).
Do any of you have any idea what these devices are? Any idea what the
isotopic content might be?
Jim Barnes, CHP
james.g.barnes@att.net
************************************************************************
You are currently subscribed to the Radsafe mailing list. To
unsubscribe, send an e-mail to Majordomo@list.vanderbilt.edu Put the
text "unsubscribe radsafe" (no quote marks) in the body of the e-mail,
with no subject line. You can view the Radsafe archives at
http://www.vanderbilt.edu/radsafe/
************************************************************************
You are currently subscribed to the Radsafe mailing list. To
unsubscribe, send an e-mail to Majordomo@list.vanderbilt.edu Put the
text "unsubscribe radsafe" (no quote marks) in the body of the e-mail,
with no subject line. You can view the Radsafe archives at
http://www.vanderbilt.edu/radsafe/