[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Electronic Dosimter's use for pan/ceph dental X-ray unit



Vaidy,

I have seen performance test results for these type of dosimeters from 
the intercomparisons performed at Oak Ridge a few years ago (PDIS 1 and 
2).  The electronic dosimeters did poorly with X-rays.  Maybe there have 
been improvements, but the problem had to do with the battery energy 
required to perform accurately with low E photons.

If you were more interested in just looking at response, and you could 
perform your own calibration they may be useful.  Of course you could 
also use a standard ionization chamber and be a bit more confident in 
the number you were getting (assuming it's calibrated for the energy you 
are assessing).

Good luck

Rob Gunter




>Date: Wed, 13 May 1998 17:20:49 -0500 (CDT)
>Reply-To: radsafe@romulus.ehs.uiuc.edu
>From: vaidy.bala.lab@govmail.gov.sk.ca
>To: Multiple recipients of list <radsafe@romulus.ehs.uiuc.edu>
>Subject: Electronic Dosimter's use for pan/ceph dental  X-ray unit
>
>
>
>
>Sir/ Madam: Would anyone know of electronic  Dosimeters use  for 
radiation 
>out-put measurement of   Pan/ Ceph Dental   X-ray units?    Is it 
possible 
>to use  ED?   Any comments, anyone familiar or has used the EDs.
>
>
>
>
>Vaidy
>



Robert J. Gunter, M.Sc. 
Health Physicist
ICN Dosimetry Service
ICN Plaza
3300 Hyland Avenue
Costa Mesa, CA  92626
Ph:  800 548-5100 X 2414
     +714 545-0100 X 2414
Fax: +714 668-3149
Email: rjgunter@icnpharm.com


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com