[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Personnel Contamination Monitor



Sandy.
The problem at Clinton is two fold one is the radon produce from the area
and the other is from the material used in the concrete,We've done air
samples inside and out during peak temperature inversion times. In comparing
the two we've found no difference between the two. The main facture is when
a ventilation system is down for maintenance. That's when we see a higher
concentration of radon and radon daughters. The PCM2 has helped alot with
the alpha discrenimator for those energy levels.
James Wade RPSS Clinton Power Station
----- Original Message -----
From: Sandy Perle <sandyfl@earthlink.net>
To: Multiple recipients of list <radsafe@romulus.ehs.uiuc.edu>
Sent: Friday, May 21, 1999 3:45 PM
Subject: RE: Personnel Contamination Monitor


> > BTW you should know better than to
> > wear polyester into a nuc plant!
>
> True ... but at the time, I didn't expect to enter the RCB, and, I
> can't wear jeans on an assessment. Of interest is that Clinton's
> contamination monitors were the only ones I've experienced where
> there was this sensitivity problem, compared to the many other sites
> I've either worked at, or assessed through NVLAP or other Rad
> Protection consulting contract. The staff there complained that their
> system was an on-going problem. Perhaps the PCM-2 has fixed this!
>
> Sandy Perle
> E-Mail: sandyfl@earthlink.net
> Personal Website: http://www.geocities.com/capecanaveral/1205
>
> "The object of opening the mind, as of opening
> the mouth, is to close it again on something solid"
>               - G. K. Chesterton -
> ************************************************************************
> The RADSAFE Frequently Asked Questions list, archives and subscription
> information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html

************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html