RE: AW: X-ray dose

["Ryder, R (Roy)" <R.RYDER@dl.ac.uk>]

What filters were used on the TLDs? Are you sure that they were in the
centre of the beam at the correct distance?

Roy Ryder

Daresbury Laboratory, UK


-----Original Message-----
From: D J Hornsey [mailto:bssdjh@bath.ac.uk]
Sent: 23 September 1999 14:47
To: Multiple recipients of list
Subject: Re: AW: X-ray dose



  Thank you sunny Salzburg. The ICRP 33 data confirms the data I was using
to calculate the expected dose from this X-ray system. My TLDs were read
by an acredited dosimetry service, so no calibration needed. So I still
have a problem!!

         David Hornsey 

 **************************************
 * David J. Hornsey, Radiation Safety.*
 * South Building,                    *
 * University of Bath                 *             
 * Claverton Down,                    * 
 * Bath BA2 7AY. UK.                  *
 *                                    *
 * tel:01225 826540                   *
 * fax:01225 826779                   *  
 * e-mail: d.j.hornsey@bath.ac.uk     *
 **************************************


************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html