[ RadSafe ] Interlocks - Any relevant ANSI Standards

[Sandy Perle]

Pete,

This may be of use:

N43.1
Radiological Safety in the Design & Operations of Particle Accelerators
(Standard is under development.) Working Group Chair: Scott Walker, James
Liu

N43.3
General Radiation Safety Standard for Installations Using Non-Medical X-ray
and Sealed Gamma Ray Sources, Energies up to 10 MeV (Standard under
revision.)
Working Group Chair:  Scott Schwahn

----------------------------------------------------------------
Sandy Perle 
Senior Vice President, Technical Operations 
Global Dosimetry Solutions, Inc. 
2652 McGaw Avenue
Irvine, CA 92614
 
Tel: (949) 296-2306 / (888) 437-1714 Extension 2306 
Tel: (949) 419-1000 Extension 2306
Fax:(949) 296-1144
 
Global Dosimetry Website: http://www.dosimetry.com/ 
Personal Website: http://sandy-travels.com/ 
 

-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On Behalf
Of Peter Collopy
Sent: Wednesday, March 21, 2007 9:33 AM
To: radsafe at radlab.nl
Subject: [ RadSafe ] Interlocks - Any relevant ANSI Standards

Here at RPI some enterprizing students are engaged in a design project to
provide an interlock for access to our accelerator's target room. In an
effort to resolve one issue with the design I am looking to identify any
ANSI standard or similar standard that specifically addresses the
design/safety components of any interlock used for accelerators, multicurie
irradiation facilties, etc..
   
  So any info is appreciated
   
  If you wish to reply to me directly use my RPI address at collop at rpi.edu
   
  Thanks in advance
   
  Pete C.


      Peter Collopy, CIH, CHP, CSP 
Director, Entropy Control 
Chaos for the Future 
154 Third Street
Troy, NY 12180
518.271.1420




 
---------------------------------
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and
hotel bargains.
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/