[ RadSafe ] Gas leak kills 2 at nuclear plant

Perle, Sandy sperle at mirion.com
Tue Apr 8 09:17:54 CDT 2008


While this was a "non-nuclear event", the wire services will obviously focus on the fact that it occurred in a nuclear plant in Pakastan.

Gas leak kills 2 at nuclear plant

ISLAMABAD, Pakistan - A gas leak killed two workers at a nuclear plant undergoing annual maintenance Tuesday, Pakistani officials said.

The Khushab heavy water plant was shut down for maintenance when the gas leaked, the Pakistan Atomic Energy Commission said.

"All necessary steps were taken, including evacuation of personnel as a precautionary measure," it said.

Police near the facility southeast of Islamabad say they were advised by plant officials to prepare buses for a wider evacation, but then were told they would not be needed.

"Situation was immediately brought under control, and two workers lost their lives while controlling the incident. There is no threat to public life," the Atomic Energy Commission said.

It said the leaking gas was burned off by plant equipment.

----------------------------------------------------------------
Sander C. Perle 
President
Mirion Technologies, Inc., Dosimetry Services Division 
2652 McGaw Avenue
Irvine, CA 92614

Tel: (949) 296-2306 / (888) 437-1714 Extension 2306 
Fax:(949) 296-1144
 
Global Dosimetry Solutions: http://www.dosimetry.com/ 
Mirion Technologies: http://www.mirion.com/ 
 


PROPRIETARY INFORMATION NOTICE:  This e-mail message and all attachments transmitted with it are intended solely for use by the addressee and may contain proprietary information of Mirion Technologies and/or its affiliates.  If the reader of this message is not the intended recipient, you are hereby notified that any review, dissemination, distribution, copying or other use of this message is strictly prohibited.  If you have received this message in error, please notify the sender immediately by replying to the message, delete the original message and all attachments from your computer, and destroy any copies you may have made.  Thank you.




More information about the RadSafe mailing list