[ RadSafe ] Uranium grinding wheels

John R Johnson idias at interchange.ubc.ca
Wed Jun 10 13:54:41 CDT 2009


Franz

I don't think that uranium is used for grinding but can be present in the 
material, such as granite, that is.

John
***************
John R Johnson, PhD
CEO, IDIAS, Inc.
4535 West 9th Ave
604-676-3556
Vancouver, B. C.
V6R 2E2, Canada
idias at interchange.ubc.ca


----- Original Message ----- 
From: "Franz Schönhofer" <franz.schoenhofer at chello.at>
To: "'Brennan, Mike (DOH)'" <Mike.Brennan at DOH.WA.GOV>; <radsafe at radlab.nl>
Sent: Wednesday, June 10, 2009 11:17 AM
Subject: AW: [ RadSafe ] Uranium grinding wheels


RADSAFErs,

Looking on Wikipedia, which I really do not esteem because of the very poor
performance (also on uranium!) I find that "uranium is slightly softer than
steel". So why should it be used for grinding????? Maybe uranium oxide or
uranium carbide would be better suited, but no such compounds have been
mentioned! So what is really behind that "urban myth" that uranium is
present in grinding wheels? This is really not positive for the "HSS"!

Franz

Franz Schoenhofer, PhD
MinRat i.R.
Habicherg. 31/7
A-1160 Wien/Vienna
AUSTRIA


-----Ursprüngliche Nachricht-----
Von: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] Im Auftrag
von Brennan, Mike (DOH)
Gesendet: Mittwoch, 10. Juni 2009 18:40
An: radsafe at radlab.nl
Betreff: RE: [ RadSafe ] Uranium grinding wheels

I would think that the issue here is with breathing the dust, and while I
agree with Franz about the radioactive isotopes that are likely in the dust,
I am skeptical as to whether they are likely to be the biggest health risk.
It is entirely possible that silica and/or asbestoses are in the grinding
wheel, and there are bound to be fine particles of whatever is being ground.
None of these go well with lung tissue.

The US Navy some time ago instituted dust control procedures for health
protection reasons (and there was a lot of complaining by the "old hands").
They found that such procedures actually saved a lot of money in decreasing
cleanup time and cost, and preventing damage to equipment from the dust.
Doing things right often costs less in the long run than doing them without
worrying about the consequences.

-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On Behalf
Of Franz Schönhofer
Sent: Wednesday, June 10, 2009 5:09 AM
To: neildm at id.doe.gov; radsafe at radlab.nl
Subject: AW: [ RadSafe ] Uranium grinding wheels

Dave,

There is not the slightest doubt that grinding wheels contain uranium,
thorium, K-40 and decay products. Your body as well as mine and foodstuff
contains all these long-lived radionuclides and additionally shorter lived
ones like C-14 and tritium, not to talk about more exotic ones - of natural
origin.

Abrasives may contain naturally occurring radioactive material (NORM),
depending on their origin. Best known are the zirconium containing sands.
Those compounds are mostly used because they are very hard, very resistant
to mechanical wear, and last extremely long before having to be replaced.

You do not specify what "HSS" means, further I miss a description of what
substances are ground - dry or wet operation. In the latter case the air
borne particles would really play no role. In the first case: Do you eat
grinding wheels dust?

Best regards,

Franz

Franz Schoenhofer, PhD
MinRat i.R.
Habicherg. 31/7
A-1160 Wien/Vienna
AUSTRIA


-----Ursprüngliche Nachricht-----
Von: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] Im Auftrag
von neildm at id.doe.gov
Gesendet: Dienstag, 09. Juni 2009 23:51
An: radsafe at radlab.nl
Betreff: [ RadSafe ] Uranium grinding wheels

There is an HSS bulletin out about grinding wheels containing uranium
potentially causing surface contamination and/or airborne particles.

I had never heard of this, nor can I find any reference to uranium
containing abrasives on the internet.  Undoubtedly, it is present as a trace
material, but this would not seem to me to be of any concern at all.

Does anyone have better information?

Thank you,
Dave Neil

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the 
RadSafe rules. These can be found at: 
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit: 
http://radlab.nl/radsafe/ 




More information about the RadSafe mailing list