AW: [ RadSafe ] how many "gamma knives" in the US ? - An off topicaddon.

[Franz Schönhofer]

Colette,

Comprehensive and I hope accurate information and numbers about the
distribution of Cyberknives throughout the world can be found on Google,
using "cyberknives" for search. I have to admit, that though being
interested in these topics I had no idea that linear accelerators were used
for radiochirurgical purposes. The advantage is quite clear: As soon as you
switch off the electricity there is no radiation! It was stated on
Wikipedia, that no advantage could be found over conventional radiation
therapy. Is there anything in this direction that RADSAFErs could comment
on?

Best regards

Franz

Franz Schoenhofer, PhD
MinRat i.R.
Habicherg. 31/7
A-1160 Wien/Vienna
AUSTRIA


-----Ursprüngliche Nachricht-----
Von: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] Im Auftrag
von Colette Tremblay
Gesendet: Mittwoch, 23. September 2009 17:54
An: RADSAFE
Betreff: RE: [ RadSafe ] how many "gamma knives" in the US ? - An off
topicaddon.

What about Cyberknives? There is one at the CHUM hospital in Montreal.

Colette
---

Colette Tremblay, spécialiste en radioprotection
Service de sécurité et prévention
Pavillon Ernest-Lemieux - Université Laval
2325, Rue de la Vie-Étudiante, local 1533
Québec (Québec) G1V 0B1
Téléphone : (418) 656-2131 poste 2893
Télécopie : (418) 656-5617



-----Message d'origine-----
De : radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] De la part
de Robert J Gunter
Envoyé : 23 septembre 2009 11:33
À : 'RADSAFE'
Objet : RE: [ RadSafe ] how many "gamma knives" in the US ? - An off
topicadd on.

Interesting that there are as many Gamma knives in Dallas,TX as all of
Canada....

Robert J. Gunter, CHP
CHP Consultants
rjgunter at chpconsultants.com
www.chpconsultants.com
www.chpdosimetry.com
Tel:  +(865) 387-0028
Fax:  +(866) 491-9913 



-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On Behalf
Of Maury Siskel
Sent: Tuesday, September 22, 2009 9:28 PM
To: Forbes, John
Cc: RADSAFE
Subject: Re: [ RadSafe ] how many "gamma knives" in the US ?

The google list at:
http://www.elekta.com/patient_us_leksell_gamma_knife_centers.php#USA
shows 93 locations in the US.  That same site does total  3 in Canada.
Best,
Maury&Dog

===================
Forbes, John wrote:

>http://www.healthsystem.virginia.edu/internet/gammaknife/
>
>-----Original Message-----
>From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On 
>Behalf Of Jaro
>Sent: Tuesday, September 22, 2009 4:24 PM
>To: RADSAFE
>Subject: [ RadSafe ] how many "gamma knives" in the US ?
>
>Anyone on Radsafe know how many "gamma knives" there currently are in 
>the US ?
>
>....in Canada, it appears that there are only three: the first was 
>installed in Winnipeg (2003), the next one in Sherbrooke, Quebec (2004) 
>and the third in Toronto, Ontario (2005).
>
>Any additional info would be welcome.
>
>Thnx
>
> Jaro
>^^^^^^^^^^^^^^^^^^^^^
>
>
>
>  
>

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://radlab.nl/radsafe/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://radlab.nl/radsafe/