[ RadSafe ] Tritium decontamination

[Doug Aitken]

I just want to thank all those who responded with their experiences and
suggestions!

Regards
Doug

___________________________________
Doug Aitken
QHSE Advisor
D&M Operations Support
jdaitken at sugar-land.oilfield.slb.com
Mail: c/o Therese Wigzell,
Schlumberger,
Drilling & Measurements HQ,
300 Schlumberger Drive, MD15,
Sugar Land, Texas 77478


-----Original Message-----
From: radsafe-bounces at health.phys.iit.edu
[mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of Doug Aitken
Sent: Tuesday, April 13, 2010 1:41 PM
To: radsafe at agni.phys.iit.edu
Subject: [ RadSafe ] Tritium decontamination

Does anyone on the list have experience in decontamination of equipment
contaminated with tritium. Note this is not an enquiry on water
contamination or decontamination of a facility. 

Simply a piece of equipment where a small amount of tritium has be released
into its interior. I don't want this to become a general discussion on
tritium contamination (which could get sidetracked....), so if anyone has
personal experience, please contact me off-line. 

Regards
Doug

___________________________________
Doug Aitken
QHSE Advisor
D&M Operations Support
jdaitken at sugar-land.oilfield.slb.com
Mail: c/o Therese Wigzell,
Schlumberger,
Drilling & Measurements HQ,
300 Schlumberger Drive, MD15,
Sugar Land, Texas 77478


_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://health.phys.iit.edu