[ RadSafe ] Nuclear Generation Question
Bair, William
BAIRWJ at nv.doe.gov
Tue Oct 19 15:16:17 CDT 2010
Fun like tank farms?
Bill Bair, Sr. Scientist
Radiological Engineering
NSTec, LLC
(702)295-4463 (W)
(702)630-0631 (C)
(702)794-6770 (P)
(702)295-9335 (fax)
-----Original Message-----
From: radsafe-bounces at health.phys.iit.edu [mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of Hunter, Jeffrey L
Sent: Tuesday, October 19, 2010 1:13 PM
To: 'The International Radiation Protection (Health Physics) Mailing List'
Subject: Re: [ RadSafe ] Nuclear Generation Question
Rodney,
I noted that you signed "former Zion Station employee." Energy Solutions is staffing up to start D&D. Any temptation to go back and take the place down? I can tell you that D&D is both interesting and fun.
Regards,
Jeff Hunter
Hanford ALARA Center
Mission Support Alliance
P.O. Box 650, MSIN SO-19
Richland, WA 99352
(509) 373-0656, Office
(509) 308-5627, Cell
-----Original Message-----
From: radsafe-bounces at agni.phys.iit.edu [mailto:radsafe-bounces at agni.phys.iit.edu] On Behalf Of Bauman, Rodney L (84U)
Sent: Tuesday, October 19, 2010 12:44 PM
To: 'The International Radiation Protection (Health Physics) Mailing List'
Subject: Re: [ RadSafe ] Nuclear Generation Question
Each unit at Zion Station (2 units) produced 1098 MW (net electric).
Each generator was rated at 1220 MVA, 25 kV, with a 0.9 power factor (thus 1098 MW when you do the math).
So at full power, each unit generated ~ 44,000 amps at 25 kV.
However, just outside the turbine building were the main power transformers, which stepped-up the voltage to 345 kV for distribution on the grid. So, that would've reduced the amps to around 3,200.
Rodney Bauman
Former Zion Station Employee
-----Original Message-----
From: radsafe-bounces at health.phys.iit.edu [mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of James Barnes
Sent: Tuesday, October 19, 2010 2:46 PM
To: The International Radiation Protection (Health Physics) Mailing List
Subject: [ RadSafe ] Nuclear Generation Question
Been awhile since I worked in the generation industry.
Can someone tell me a typical electrical output from a nuclear generating station (voltage / current). I seem to recall from my power plant days that the voltage was relatively low (several kV), but the current was very high. This was stepped up to very high voltage for transmission. I can't recall typical output levels, however.
Jim Barnes, CHP
Boeing
_______________________________________________
You are currently subscribed to the RadSafe mailing list
Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu
_______________________________________________
You are currently subscribed to the RadSafe mailing list
Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu
_______________________________________________
You are currently subscribed to the RadSafe mailing list
Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu
More information about the RadSafe
mailing list