[ RadSafe ] Polonium-210 poisoning

[Busby, Chris]

That's the one.

Chris





-----Original Message-----
From: radsafe-bounces at agni.phys.iit.edu on behalf of radbloom at comcast.net
Sent: Sun 9/11/2011 5:59 PM
To: The International Radiation Protection (Health Physics) Mailing List
Cc: The International Radiation Protection (Health Physics) Mailing List
Subject: Re: [ RadSafe ] Polonium-210 poisoning
 


I think you mean Tl-208, 2.6 MeV (4N series, i.e., Th-232...Ra-228...); not Tl-206, photon emissions less than 1% of the time, 0.803 MeV maximum (4n+2 series, i.e., U-238...Ra-226...).   


Cindy Bloom 


----- Original Message -----




From: "Chris Busby" <C.Busby at ulster.ac. uk > 
To: "The International Radiation Protection (Health Physics) Mailing List" < radsafe @ agni .phys. iit . edu >, "The International Radiation Protection (Health Physics) Mailing List" < radsafe @ agni .phys. iit . edu > 
Sent: Sunday, September 11, 2011 11:54:53 AM 
Subject: Re: [ RadSafe ] Polonium-210 poisoning 



Well they originally thought it was Tl206, which has that big gamma line up in the 2.2MeV region because there was some weak gamma, thats the decay series of one of the Radiums , 228 I think. That would fit with a kitchen operation. But I didnt hear about any reactor gamma nuclide . This is from memory but its one of the Tl s 
Chris 

-----Original Message----- 
From: radsafe -bounces@ agni .phys. iit . edu on behalf of Mark Ramsay 
Sent: Sun 9/11/2011 2:20 PM 
To: The International Radiation Protection (Health Physics) Mailing List 
Subject: Re: [ RadSafe ] Polonium-210 poisoning 
  
Do I not recall some gamma spec (yes gamma) was done which linked it to reactor based production (based on impurities) ? 

Rgs 

Mark 

_______________________________________________ 
You are currently subscribed to the RadSafe mailing list 

Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http ://health.phys. iit . edu / radsaferules . html 

For information on how to subscribe or unsubscribe and other settings visit: http ://health.phys. iit . edu 
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu