[ RadSafe ] Nuclear Power in Utah?

Sander Perle sandyfl at cox.net
Wed Aug 27 11:36:07 CDT 2014


Joe, not only your well-taken comment, I wonder how they would build the
distribution system to get the power to where it is needed, and last I
looked, there isn¹t much of a demand in Utah! Normally units are built close
to the area that it wishes to serve. Now it could be possible that the
current grid in the area is able to ship he power to where it is needed, but
what is around Utah where there is an energy demand?

Regards,

Sandy
Retired, Consultant

From:  <JPreisig at aol.com>
Reply-To:  "The International Radiation Protection (Health Physics) Mailing
List" <radsafe at health.phys.iit.edu>
Date:  Wednesday, August 27, 2014 at 9:32 AM
To:  <radsafe at health.phys.iit.edu>
Subject:  Re: [ RadSafe ] Nuclear Power in Utah?

Radsafe,
 
    Utah is earthquake country.  Read about it in  Bolt's book on
earthquakes.  No tsunami hazard, thank goodness.  Bad  idea to build a
nuclear plant 
in Utah???  Engineer it very well....
 
   Joe Preisig
 
 
 
 
In a message dated 8/27/2014 10:56:03 A.M. Eastern Daylight Time,
sandyfl at cox.net writes:

Thanks  Brent,

This would be a real achievement if it ever gets off the ground.  However,
with the politics out west, including Utah, there is a strong  anti-nuclear
stance and seriously doubt that this project has any legs to  stand on. I
hope that I am wrong!

Regards,

Sandy
Retired,  Consultant

From:  Brent Rogers  <brent.rogers at optusnet.com.au>
Reply-To:  "The International  Radiation Protection (Health Physics) Mailing
List"  <radsafe at health.phys.iit.edu>
Date:  Wednesday, August 27, 2014  at 4:24 AM
To:  "The International Radiation Protection (Health  Physics) Mailing
List"
<radsafe at health.phys.iit.edu>
Subject:  [ RadSafe ]  Nuclear Power in  Utah?

http://www.world-nuclear-news.org/NN-AP1000s-mooted-for-Utah-site-2108147.ht
ml

Brent  Rogers
Sydney Australia

Sent from my  iPad

_______________________________________________
You are  currently subscribed to the RadSafe mailing list

Before posting a  message to RadSafe be sure to have read and understood the
RadSafe rules.  These can be found  at:
http://health.phys.iit.edu/radsaferules.html

For information on  how to subscribe or unsubscribe and other settings
visit:
http://health.phys.iit.edu



_______________________________________________
You  are currently subscribed to the RadSafe mailing list

Before posting a  message to RadSafe be sure to have read and understood
the RadSafe rules.  These can be found at:
http://health.phys.iit.edu/radsaferules.html

For  information on how to subscribe or unsubscribe and other settings
visit:  http://health.phys.iit.edu

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the
RadSafe rules. These can be found at:
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit:
http://health.phys.iit.edu





More information about the RadSafe mailing list