RE: cyclotrons

["Ryder, R (Roy)" <R.Ryder@dl.ac.uk>]

Andrew,

I am involved in the design, build and operation of accelerators in the UK.
Your list of references was helpful. I understand that the first book is now
out of print. Are the second and third references available on the web?

Thanks for your help

Roy Ryder
Daresbury Laboratory, UK


-----Original Message-----
From: Karam, Andrew [mailto:Andrew_Karam@URMC.Rochester.edu]
Sent: 14 April 2000 22:16
To: Multiple recipients of list
Subject: cyclotrons


This is forwarded from the Academic and Medical RSO group, to which I
forwarded your request. 


Andy

-----Original Message-----
From: Sylvia Revell [mailto:Sylvia.Revell@email.swmed.edu] 

I would recommend the following:

IAEA, Technical Reports Series No. 283, Radiological Safety Aspects of the
Operation of Proton Accelerators, R.H. Thomas, G.R. Stevenson, Vienna 1988,
STI/DOC/10/283  ISBN 92-0-125188-2

Health Physics Manual of Good Practices for Accelerator Facilities,
SLAC-327, UC-41 (A)  National Technical Information Service, US Dept of
Commerce.

American National Standard N43-4 Safety in the Design and Operation of
Particle Accelerators

OSHA Standards - Part 1920.96 (Ionizing Radiation) of Chapter XVII of tile
29 CFR

If I can be of any further help, let me know.
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html