[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Dirty Bomb Rescue Worker
Rob,
10 CFR mandates an exposure limit for rescue. Also, the prospective rescuer should be carrying an Ion Chamber type instrument if the main concern in Gamma. I believe the exposure limit for rescue is 25Rem but only on a voluntary basis.(Don't quote me on that. I haven't had cause to look it up in many years.) SO for a 15 minute rescue, the dose rate would have to be a constant 100,000 mRem/hr for the rescuer to get the limit for rescue dose.
Floyd W. Flanigan B.S.Nuc.H.P.
-----Original Message-----
From: rob.w.powell@exxonmobil.com [mailto:rob.w.powell@exxonmobil.com]
Sent: Monday, December 15, 2003 8:29 AM
To: radsafe@list.vanderbilt.edu
Subject: Dirty Bomb Rescue Worker
During the last 2 years of discussions about dirty bomb response, did
anyone see/develop a maximum exposure limit for a rescue worker? For
instance, a bomber explodes the bomb but the gamma source just becomes
unshielded, it doesn't disperse to any extent. An injured, immobile,
bleeding employee is in the 'hot zone' near the source, and a rescue worker
arrives with a Geiger counter. As he/she approaches the employee while
reading the Geiger counter, at what reading (exposure rate) should the
rescue worker stop after determining that his/her risk of death during the
rescue is as great as that of the bleeding employee's death? We've been
assuming that the rescue worker takes 15 minutes to remove the employee
from the hot zone (< 2 mR/hr). This all may seem too dispassionate, but we
have guidance about rescuing employees who have been electrically shocked,
been overcome with gases, etc.
-Rob Powell
ExxonMobil
Safety, Health, & Environment
************************************************************************
You are currently subscribed to the Radsafe mailing list. To
unsubscribe, send an e-mail to Majordomo@list.vanderbilt.edu Put the
text "unsubscribe radsafe" (no quote marks) in the body of the e-mail,
with no subject line. You can view the Radsafe archives at
http://www.vanderbilt.edu/radsafe/
************************************************************************
You are currently subscribed to the Radsafe mailing list. To
unsubscribe, send an e-mail to Majordomo@list.vanderbilt.edu Put the
text "unsubscribe radsafe" (no quote marks) in the body of the e-mail,
with no subject line. You can view the Radsafe archives at
http://www.vanderbilt.edu/radsafe/