[ RadSafe ] Canberra ADM-300 pin-outs

[Robert Atkinson]

Thanks for all the help,
Canberra came up with the goods.
For reference it's

Pin 1 +5V out
Pin 2 RS232 TX (to pin 2 0f PC 9W D)
Pin 3 RS232 RX (to pin 3 0f PC 9W D)
Pin 4 +9V in
Pin 5 Ground
Pin 6 Audio out.

Robert.

-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On
Behalf Of Robert Atkinson
Sent: 07 May 2005 14:06
To: radsafe at radlab.nl
Subject: [ RadSafe ] Canberra ADM-300 pin-outs


Hi,
Does anyone know the pin-out designations for the auxiliary connector on
the Canberra (NRC?) ADM-300A survey meter
 
Any opinions expressed in this email are those of the individual and not necessarily Genetix Ltd (Genetix) or any company associated with it. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. If you have received this email in error please notify Genetix by telephone on +44 (0)1425 624600. 
 

The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the Genetix network. Genetix will not be liable for direct, special, indirect or consequential damages as a result of any virus being passed on, or arising from alteration of the contents of this message by a third party.