[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: STATISTICAL FREE RELEASE RAD SURVEYING TECHNIQUES.
The NRC, EPA, DOE and DoD have a working group currently finishing a
new survey manual. It is the Multi-Agency Radiation Survey and Site
Investigation Manual (MARSSIM). MARSSIM is a new radiological
decommissioning guide due to be submitted to the federal register
Jul 96. This manual, which will take the place of NUREG/CR 5849, is a
federal guide that will be accepted by both the NRC and the EPA. One
of the main purposes of this guidance is to translate release
criteria, which will be dose-based, into something that can be
measured (e.g., pCi/g in soil). Another important aspect of this
document is that it presents guidance on how to statistically
demonstrate that a site has been adequately remediated. I would also
suggest you read NUREG 1505.
Julie Coleman
julie.coleman@gaurdian.brooks.af.mil
______________________________ Reply Separator _________________________________
Subject: STATISTICAL FREE RELEASE RAD SURVEYING TECHNIQUES.
Author: radsafe@romulus.ehs.uiuc.edu at INTERNET-HUB
Date: 11/7/95 12:42 PM
S. Green, R. H. Miller and R. A. Nelson, "Developement and Use of
Statistcal Survey Criteria for Release of Materials at a Former Uranium
Processing Facility," Health Physics Vol. 61, No. 6 (December), pp. 903-911,
1991.
The above article describes a random sampling technique for the free-release
of materials at a radiation facility. It received the blessing of DOE and
the state of Missouri to apply this technique for the D&D of the Weldon
Spring Site in the late 1980's. This was applied to historically low
contaminated surfaces such as office buildings and other non-rad structures
at radiation facilities. Presently 100% surveying of all structure surfaces
at such facilities is required.
Use of this technique could save millions of manhours and tax-payer's
dollars in the huge amount of D&D projects coming up in the future.
I would like to hear if this technique is being applied elsewhere. Also,
what are the opinions of Radsafers about this random sampling survey
technique?