[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re[2]: ram in transitJOw3]yy*j]
ùÍ»þ÷Õoòþò¿nÍùÍùû¯·ß±é]úÖ?;þû÷sýFþò÷³þ²ûüûóå)On Sat, 16 Dec 1995
sandy_perle@email.fpl.com wrote:
Cüm/ùñþòõa²â
ûâ> Date: Sat,#×¥qõ 16 Dec 95 10:58:01 -0600
> þò<êÁþûúÖûþõ¡ée·ûä8õ5~Þé]ûïkâÝøà]þOmûô¨íy÷³{íYûûâFrom:
sandy_perle@email.fpl.comÙÛþþúÖíy=º9É£ÖþùÖäÄXFßÄ> To: Multiple recipients of
list <radsafe@romulus.ehs.uiuc.edu> > Subject: Re[2]: ram in transit
>
> Trisha is absolutely correct. I was in Washington, DC last week and
> then was in transit to Chicago a 2 Ci. Cs-137 source was shipped to my
> facility. It arrived at our loading dock on Thursday morning and was
> only addressed to Florida Power and Light Company. I suppose the
> shipper figured out that the "high;y" paid mail room staff would most
> definitely know to whom the shipment should be delivered, and that
> they would properly notify the recipient. Of course this was far from
> the truth. As luck would have it, one of the other HPs on the
> corporate staff was notified and the survey was completed just minutes
> before the 3 hour limit was exceeded. Our staff determined that the TI
> on the shipping papers was not correct. The company who shipped the
> source will not be names, however, they are a large corporation. One
> would not think it necessary, however, it would be prudent for you to
> do the following when expecting a shipment of radioactive material:
>
> 1. Have the shipper notify you "prior to shipping" the material.
>
> 2. Provide you with the name of the shipping company, estimated date
> of delivery and a number for you to check on shipping status.
>
> 3. Make them understand that they MUST have a name and a phone number
> on the shipment and shipping papers so that the proper personnel
> are notified when it is delivered.
>
> 4. Document everything ...
>
>
> Sandy Perle
> Supervisor Health Physics
> Florida Power and Light Company
> Nuclear Division
>
> (407) 694-4219 Office
> (407) 694-3706 Fax
>
> sandy_perle@email.fpl.com
>
> HomePage: http://www.lookup.com/homepages/54398/home.html
>
>
> ______________________________ Reply Separator _________________________________
> Subject: Re: ram in transit
> Author: radsafe@romulus.ehs.uiuc.edu at Internet-Mail
> Date: 12/15/95 3:06 PM
>
>
> The only thing I would add, is that contrary to one other comment, there
> IS a limit on how long packages can sit at a licensed facility. Part 20
> requires that packages must be monitored within 3 hours of receipt, or 3 hrs
> after the business opens if the package was delivered during off duty hours.
> It is inferred that when you monitor the package, you open it, and properly
> store the material.
>
>
> Trisha Edgerton
> Sr. Health Physicist
> State of California, Radiologic Health Branch
> pedgerto@hw1.cahwnet.gov
>
>
>