Re: Dispersion Models

[Bob Hearn <rah@america.net>]

You might try CAP88 from EPA for a rough assessment that can be run quickly
since you are probably concerned with immersion dose. Be careful of
sector-averaging considerations and such if you use models developed for
long term routine releases, but Reg. Guide 1.111 can give you a start for
what you describe.

Bob Hearn

At 07:26 AM 12/10/97 -0600, David Hearnsberger wrote:
>Does anyone know to whom I can speak about finding some information on
>the GENII and/or Hotspot software? I need to characterize a plume of noble
>gas from a release stack containing several hundred Curies of this gas?
>This is not an explosive release. Instead, it is a release of several
>hundred Curies in a 24 hour period. Thanks in advance for any help you can
>give.
>
>*****************************************************************
>David W. Hearnsberger		phone:	(409)845-7551           *
>Texas A&M University		fax:	(409)862-2667           *
>Nuclear Science Center		email:	hberger@trinity.tamu.edu*
>FE Box 89 Bldg. 1095                                            *
>College Station, Texas                                          *
>                 77840                                          *
>*****************************************************************
>
>