[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Industrial radiography and computers

To: post RADSAFE <radsafe@romulus.ehs.uiuc.edu>
Subject: Re: Industrial radiography and computers
From: "Gibbs, S Julian" <s.julian.gibbs@vanderbilt.edu>
Date: Sat, 7 Mar 1998 19:56:46 -0600 (Central Standard Time)
cc: Multiple recipients of list <radsafe@romulus.ehs.uiuc.edu>
Disposition-Notification-To: "Gibbs, S Julian" <s.julian.gibbs@vanderbilt.edu>
In-Reply-To: <199803061706.JAA05935@cats.ucsc.edu>
Priority: NORMAL
Read-Receipt-To: "Gibbs, S Julian" <s.julian.gibbs@vanderbilt.edu>
Reply-To: s.julian.gibbs@vanderbilt.edu
Sender: gibbss@vanderbilt.edu

Most x-ray machines now used in medical radiology contain 
microprocessors.  CT scanners and gamma cameras are totally 
computerized.  No problems.  Although x-ray exposures for 
industrial applications may be much larger, it seems 
unlikely that there will be problems of erasure of disks, 
etc.  

***********************************************************
S. Julian Gibbs, DDS, PhD               Voice: 615-322-3190
Professor of Radiology                    FAX: 615-322-3764 
Dept. of Radiology & Radiological Sciences
Vanderbilt University Medical Center
Nashville TN 37232-2670 Email:s.julian.gibbs@Vanderbilt.Edu

References:
- Industrial radiography and computers
  - From: Ken Smith <ksmith@cats.ucsc.edu>

Prev by Date: Re: MS
Next by Date: Opinions
Prev by thread: Industrial radiography and computers
Next by thread: Re: Industrial radiography and computers
Index(es):
- Date
- Thread