RE:

["Dampf, Michael" <DAMPFM@coned.com>]

We use the rod technique at Indian Point.

> -----Original Message-----
> From:	Redmond, Randy R. (RXQ)  [SMTP:RXQ@ornl.gov]
> Sent:	Wednesday, September 16, 1998 7:52 AM
> To:	Multiple recipients of list
> Subject:	
> 
> Radsafers,
> 
> This just came up as an action item to be completed by end of day
> (09/16/1998).  Please respond with your facility's method - 
> 
> What method  do you use to verify dose rate measurements are taken at
> a
> consistent distance from radioactive material packages prepared for
> shipment:
> 
> 1.	Use tape/pre-measured rod (e.g., two meter rod marked at 1
> meter)
> 
> 2.	Rely on HP Technician to take dose rate at required distance
> from package
> 
> 3.	Other.  Please note method.
> 
> Thanks.
> 
> Randy Redmond
> Lockheed Martin Energy Systems
> P.O. Box 2009
> Bldg.  9769,  MS 8081
> Oak Ridge, TN  37831-8081
> Email:  rxq@cosmail3.ctd.ornl.gov
> Phone:  423-574-5640
> Fax:  423-574-2629
> 
> **********************************************************************
> **
> The RADSAFE Frequently Asked Questions list, archives and subscription
> information can be accessed at
> http://www.ehs.uiuc.edu/~rad/radsafe.html
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html