[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Lead container

Patrick,

We have some "pigs" laying around.  I'll check to see if any fit your 
requirements. The 4 inch walls are a problem.......

I'll get back to you next week.

Denny
RSO, Carnegie Mellon U.

On Fri, 23 Oct 1998 15:05:44 -0500 (CDT) "Patrick J. McDermott" 
<mcdermot@REHS.rutgers.edu> wrote:

> Radsafers,
> 
> We are looking to acquire a lead pot/cask.  It needs to be able to 
> hold a something 3 inches in diameter and 11 inches high.  It also 
> must have 4 inch thick walls.  
> 
> This is a lot of lead, and heavy!  I would be delighted if anyone had 
> or knew of anyone who may be able to help us.  We would gladly 
> pay for shipping and are willing to negotiate if purchasing the 
> pot/cask is required.  We have a design in hand from a vendor to 
> manufacture one.  We are hoping to save a lot of money by taking 
> a large paperweight off of someone's hands.
> 
> Please respond directly to me if you can help. 
> 
> Thank you in advance for your help.
> Patrick
> 
> 
> Patrick J. McDermott
> Rutgers Envir. Health & Safety
> Rutgers, The State University
> 24 Street 1603
> Bldg 4127 Livingston Campus
> Piscataway, NJ 08854-8036
> (p) 732-445-2550 (f) 732-445-3109
> e-mail: mcdermot@rehs.rutgers.edu
> ************************************************************************
> The RADSAFE Frequently Asked Questions list, archives and subscription
> information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html

----------------------
Denis J. Rinkacs, Jr.
Radiation Safety Officer
Carnegie Mellon University
4400 5th Ave.
Pittsburgh, PA 15213
412-268-3221
412-268-3206 fax
dr4i@MAIL1.andrew.cmu.edu

************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html