Re: Treatment of Contaminated Personnel

[Robert A Scott <bobscottchp@juno.com>]

A suggestion:  Switch to integrate mode, count for 12 seconds, multiply
the result by 300 to give you exposure rate per hour.

On Tue, 2 Mar 1999 08:29:46 -0600 (CST) David.S.Villicana@ucm.com writes:
>The difficulty is: there is no instrument to measure dose rates >1000 
>R/h.
>Since the value is unknown, you cannot estimate a stay time. In an 
>official
>procedure, I think the advice should be: if your instrument is off 
>scale,
>back away.
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html