RE: Foam for immobilizing foot/hand

[Bill Kendall <KENDALL@nucusa.com>]

Be certain that what you use is cleared for medical use by the FDA.

Bill Kendall

-----Original Message-----
From: Neil, David M [mailto:neildm@id.doe.gov]
Sent: Thursday, May 20, 1999 4:22 PM
To: Multiple recipients of list
Subject: RE: Foam for immobilizing foot/hand


At least one reason you avoid skin contact is that it sticks worse than
cyanoacrylate (Krazy Glue tm). That will dissolve in acetone, but the
urethane polymer wouldn't dissolve in anything I was willing to put on my
skin.  Personal experience - the flotation voids in my canoe collected
bilgewater 'til I filled them.

Dave Neil
neildm@id.doe.gov

On Saturday, May 15, 1999 3:47 PM, Bruce Bugg [SMTP:BRUCEB@psc.state.ga.us]
wrote:
> Expanding foams are used in the packaging area all the time (similar, if
> not identical to the "crazy foam" prdoducts you get at Home Depot, etc).
> Be careful about the product you choose, most of the one's I've seen say
> to avoid skin contact, so you'd have to wrap the area in plastic or
> something to prevent that. You would also need to check for any
> off-gassing fumes, I guess...
> 
> Bruce Bugg
> 
> > -----Original Message-----
> > From:	Wes Van Pelt [SMTP:VanPeltW@idt.net]
> > Sent:	Saturday, May 15, 1999 16:11
> > To:	Multiple recipients of list
> > Subject:	Foam for immobilizing foot/hand
> > 
> > Hi Radsafers,
> > 
> > I wonder if any of you medical types know of a foam product which
> > would make a
> > "mold" of a hand or foot such that it could be repositioned exactly
> > for a nuclear
> > medicine scan at a later date.
> > 
> > What I have in mind is a kind of "shaving cream" foam which would
> > harden and form
> > a half-cast of the body part.  Then the foot or hand could be later
> > placed in the
> > half-cast and be in exactly the same position under the gamma camera.
> > 
> > I am not sure if such a product or system exists, but I would
> > appreciate names of
> > any suppliers or vendors.
> > 
> > Regards,
> > Wes
> > --
> > Wesley R. Van Pelt, Ph.D., CIH, CHP                KF2LG
> > President, Van Pelt Associates, Inc.
> > Consulting in radiological health and safety.
> > mailto:VanPeltW@IDT.net
> > http://shell.idt.net/~vanpeltw/index.html
> > 
> > 
> > **********************************************************************
> > **
> > The RADSAFE Frequently Asked Questions list, archives and subscription
> > information can be accessed at
> > http://www.ehs.uiuc.edu/~rad/radsafe.html
> ************************************************************************
> The RADSAFE Frequently Asked Questions list, archives and subscription
> information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html