[ RadSafe ] Static Magentic Field Probe

[Hoey, Edward J]

Michael,

A good and inexpensive instrument for these type of measurements is made
by MetroLab. It can be found at GMW Assoc. in Calif. The Model No. is
THM7025. Contact Ian Walker. A link is attached. 

http://www.gmw.com/magnetic_measurements/MetroLab/THM-7025.html

Regards,

Ed Hoey
Brookhaven National Laboratory
Phone 631-344-4447
Email edhoey at bnl.gov
 


-----Original Message-----
From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On
Behalf Of radsafe-request at radlab.nl
Sent: Monday, February 27, 2006 7:19 AM
To: radsafe at radlab.nl
Subject: radsafe Digest, Vol 32, Issue 1



   1. Re: Static Magentic Field Probe (dBaron)
   
----------------------------------------------------------------------

Message: 1
Date: Sat, 25 Feb 2006 21:21:19 CST
From: dBaron <baron006 at umn.edu>
Subject: Re: [ RadSafe ] Static Magentic Field Probe
To: wesvanpelt at att.net,	"'Borisky, Michael (Civ, ARL/ADLO)'"
	<mborisky at arl.army.mil>
Cc: radsafe at radlab.nl
Message-ID: <200602260321.k1Q3LJMr014799 at vanguard.software.umn.edu>
Content-Type: TEXT/plain; CHARSET=US-ASCII

Gentlemen:

The HI-3550 Static Magnetic Field Monitor is an excellent solution for
health and safety measurements of static magnetic fields, however, it
is, unfortunately, no longer available.

Regards,

Dave Baron
Holaday EMF Measurement
ETS-Lindgren
Cedar Park, Republic of Texas


On 25 Feb 2006, Wesley wrote:
> Michael and All,
> 
>  
> 
> The instrument I have successfully used for static (DC) magnetic field

> strength measurements is the Holaday Industries Magnetic Field 
> Monitor, model HI-3550 made by ETS-Lindgren, Holaday EMF Measurement, 
> Cedar Park,
TX.
> 
>  
> 
> This portable instrument measures static magnetic field in millitesla
(mT)
> using a Hall effect sensor with a three-axis (isotropic) response
enabling
> accurate measurement regardless of the field orientation.
> 
>  
> 
> Good luck.
> 
>  
> 
> Wesley R. Van Pelt, PhD, CIH, CHP
> 
> Wesley R. Van Pelt Associates, Inc.
> 
>  
> 
> -----Original Message-----
> From: radsafe-bounces at radlab.nl [mailto:radsafe-bounces at radlab.nl] On
Behalf
> Of Borisky, Michael (Civ, ARL/ADLO)
> Sent: Friday, February 24, 2006 12:48 PM
> To: radsafe at radlab.nl
> Subject: [ RadSafe ] Static Magentic Field Probe
> 
>  
> 
> Radsafers,
> 
>  
> 
> Can anyone recommend a portable meter for measuring magnetic field 
> strengths, DC for sure (NMR), and also perhaps AC?  I have heard there
> 
> are some that use an isotropic probe that would be nice.  Thanks in
advance.
> 
>  
> 
> Mike Borisky
> 
> Army Research Lab
> 
> Radiation Safety Officer
> 
>  
> 
>