No subject

no foundation
I have never come across a vendor advertising proton dosimetry, but you =
might be able to use commercially available dosimeters.
I would think that one could use a CR-39 based system, track etch =
neutron dosimeters, to get an estimated exposure.
You would likely need to do a lot of controlled exposures to derive your =
own "dose coefficients".  =20
It would likely be complicated by neutrons created by proton =
interactions as well.
(a good Clemson grad student project)
=20
Cary
--
cary.renquist at ezag.com

________________________________

From: radsafe-bounces at health.phys.iit.edu on behalf of Jess L. Addis III
Sent: Wed 09-Jun-10 14:25
To: radsafe at health.phys.iit.edu
Subject: [ RadSafe ] Proton dosimetry



Does anybody know of commercially available methods of proton dosimetry.

I haven't found much info as of yet.

Thanks much,

Larry Addis, RSO
Clemson University
ajess at clemmson.edu

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood =
the RadSafe rules. These can be found at: =
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings =
visit: http://health.phys.iit.edu <http://health.phys.iit.edu/>=20