[ RadSafe ] 10 CFR 19.13(b)

Perle, Sandy SPerle at mirion.com
Wed May 12 16:38:55 CDT 2010


Let me correct my statement by the clarification that this is only required if 2106(a) requirements are in effect. Dan (not Doug) as well as others corrected my general response to the list.

Regards,

Sandy

-----------------------------------
Sander C. Perle
President
Mirion Technologies
Dosimetry Services Division
2652 McGaw Avenue
Irvine, CA 92614

+1 (949) 296-2306 (Office)
+1 (949) 296-1130 (Fax)

Mirion Technologies: http://www.mirion.com/



-----Original Message-----
From: radsafe-bounces at health.phys.iit.edu [mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of Hoffman, Daniel E
Sent: Wednesday, May 12, 2010 2:26 PM
To: radsafe at health.phys.iit.edu
Subject: [ RadSafe ] 10 CFR 19.13(b)

Hello RadSafers.  I am curious how folks out there are interpreting the
subject regulation.  Specifically, does it apply to former workers or
only active workers?

Thanks for any feedback.

Dan Hoffman

Daniel E. Hoffman, CHP, CSP, CHMM
Radiation Safety Officer
Covidien
2703 Wagner Place
Maryland Heights, MO 63043
314-654-7906 (office)
314-625-1881 (cell)

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu

PROPRIETARY INFORMATION NOTICE:   This e-mail message and all attachments transmitted with it are intended solely for use by the addressee and may contain proprietary information of Mirion Technologies and/or its affiliates.  If the reader of this message is not the intended recipient, you are hereby notified that any review, dissemination, distribution, copying or other use of this message is strictly prohibited.  If you have received this message in error, please notify the sender immediately by replying to the message, delete the original message and all attachments from your computer, and destroy any copies you may have made.  Thank you.


More information about the RadSafe mailing list