[ RadSafe ] 10 CFR 19.13(b)
SPerle at mirion.com
Wed May 12 16:41:11 CDT 2010
For those not familiar with the regulation, here is the specific section Dan referred to:
(b) Each licensee shall make dose information available to workers as shown in records maintained by the licensee under the provisions of 10 CFR 20.2106. The licensee shall provide an annual report to each individual monitored under 10 CFR 20.1502 of the dose received in that monitoring year if:
(1) The individual's occupational dose exceeds 1 mSv (100 mrem) TEDE or 1 mSv (100 mrem) to any individual organ or tissue; or
(2) The individual requests his or her annual dose report.
Sander C. Perle
Dosimetry Services Division
2652 McGaw Avenue
Irvine, CA 92614
+1 (949) 296-2306 (Office)
+1 (949) 296-1130 (Fax)
Mirion Technologies: http://www.mirion.com/
From: radsafe-bounces at health.phys.iit.edu [mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of Hoffman, Daniel E
Sent: Wednesday, May 12, 2010 2:26 PM
To: radsafe at health.phys.iit.edu
Subject: [ RadSafe ] 10 CFR 19.13(b)
Hello RadSafers. I am curious how folks out there are interpreting the
subject regulation. Specifically, does it apply to former workers or
only active workers?
Thanks for any feedback.
Daniel E. Hoffman, CHP, CSP, CHMM
Radiation Safety Officer
2703 Wagner Place
Maryland Heights, MO 63043
You are currently subscribed to the RadSafe mailing list
Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu
PROPRIETARY INFORMATION NOTICE: This e-mail message and all attachments transmitted with it are intended solely for use by the addressee and may contain proprietary information of Mirion Technologies and/or its affiliates. If the reader of this message is not the intended recipient, you are hereby notified that any review, dissemination, distribution, copying or other use of this message is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to the message, delete the original message and all attachments from your computer, and destroy any copies you may have made. Thank you.
More information about the RadSafe