[ RadSafe ] How different agencies collaborate in USA
Brennan, Mike (DOH)
Mike.Brennan at DOH.WA.GOV
Tue Mar 20 11:00:22 CDT 2012
Greetings, Parthasarathy! I hope you enjoy your visit.
In my experience, coordination between different state and federal
agencies isn't too hard, once you get to the actual collecting of the
radioactive thingy. The people who are afraid of rad stay at the office
or Incident Command Center and argue funding, and the people who know
what they are doing go into the field, assess the situation, agree on
what needs to be done, and do it.
It might be more complex if we were dealing with a spent fuel rod, but
most of the things we get called out on, the people who actually go to
the scene usually can figure out how to work together.
From: radsafe-bounces at health.phys.iit.edu
[mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of parthasarathy
Sent: Tuesday, March 20, 2012 5:38 AM
To: The International Radiation Protection (Health Physics) Mailing List
Subject: [ RadSafe ] How different agencies collaborate in USA
Dear list members,
Greetings from Shrewsbury, Boston! I am in USA on a short visit after 31
Recently, I came across the following news item
titled "Low-level radioactive device found in home". You can access it
The report contained the following statement:
"The DEC( Department of Environmental Conservation), state Department of
Health and U.S. Environmental Protection Agency found a lucite tube,
about 9 inches long and 1 inch around, that
contained a cavity with a small amount of low-level radioactive
material, state officials said".
Frankly, I am unable to understand how these agencies coordinate their
efforts to ensure radiation protection! Every one has a job to do. Are
their functions clearly defined to avoid conflict among the lowest
levels of hierarchy?
You are currently subscribed to the RadSafe mailing list
Before posting a message to RadSafe be sure to have read and understood
the RadSafe rules. These can be found at:
For information on how to subscribe or unsubscribe and other settings
More information about the RadSafe