[ RadSafe ] Fwd: KI Shelf-Life Extension Data

Chris Alston achris1999 at gmail.com
Fri Jun 7 16:39:46 CDT 2013


Gents, et al.

If it is a USP drug (as: Potassium Iodide, 100 mg, USP), probably
there must needs be an expiration date, pro forma, no?

Cheers
cja


---------- Forwarded message ----------
From: Brennan, Mike  (DOH) <Mike.Brennan at doh.wa.gov>
Date: Fri, Jun 7, 2013 at 5:28 PM
Subject: Re: [ RadSafe ] KI Shelf-Life Extension Data
To: "The International Radiation Protection (Health Physics)
MailingList" <radsafe at health.phys.iit.edu>


I have always been a little fuzzy on what exactly goes bad with KI in
order to limit its shelf life.  I guess if it is in an unsealed
container, subject to high temperatures, high humidity, and maybe
something else, there could be some chemical changes.  But in a sealed
container that doesn't react with K and/or I, let alone the salt, it
seems to me that what you get out is what was put in.

-----Original Message-----
From: radsafe-bounces at health.phys.iit.edu
[mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of Iannaccone,
Mario (DPH)
Sent: Friday, June 07, 2013 2:15 PM
To: The International Radiation Protection (Health Physics) Mailing List
Subject: [ RadSafe ] KI Shelf-Life Extension Data

Radsafe members:

On behalf of my interim director I pose the query below:

"Please send a Note out to Rad Safe on the issue of other states with
non-EPZ KI distribution and whether any states have requested a shelf
life extension at any time."

I realize that this is primarily, a regulatory issue and may not be
applicable for this forum; however the crux of the question is centered
on extension of KI shelf-life (stability testing). Any input would be
appreciated.

MIannaccone, RCO
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood
the RadSafe rules. These can be found at:
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings
visit: http://health.phys.iit.edu
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and
understood the RadSafe rules. These can be found at:
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings
visit: http://health.phys.iit.edu


More information about the RadSafe mailing list