[ RadSafe ] GIS Location of Radioactive Sources

[Matthew Lai]

Michael,

Does your interest just lie in real-time geo tagging or are you also
interested in live integrity data as well?

The former can be accomplished via variations of GIS software and GPS
markers. The latter would depend on your cellular coverage and what type of
telemetry you're interested in. Teleview 3000 by Mirion might be the
software for you. You will need some additional hardware if you're trying
to live monitor the gauge though.

Regards,

Matthew Lai
Health Physics

Sent from mobile
On Jun 22, 2016 7:08 AM, "Cowie, Michael I" <michael.cowie at aramco.com>
wrote:

> Anyone aware of technology which can be used to tag the location of
> radioactive sources left in remote areas and display the position on a GIS
> type system? Thinking specifically of gauging devices used in remote area
> of oil/gas industry, where they are left without significant security
> controls. The system could provide warning of loss /removal or integrity
> issues with the source.
>
> Mike
> Michael Cowie
> Environmental Specialist
> Radiation Protection Unit
> Environmental Protection Dept
> Saudi Aramco
> '+966-13 880-9747 7+966-13 875-8285
> ?+966 505892063
>
> *michael.cowie at aramco.com<mailto:michael.cowie at aramco.com>
> Interact on Radiation Protection Issues! Go to:
> Environmental Protection Department - Workplace Health Protection
> Community of Practice<
> https://sharek.aramco.com.sa/cop/ih/_layouts/15/start.aspx#/>
>
>
> ________________________________
>
> The contents of this email, including all related responses, files and
> attachments transmitted with it (collectively referred to as "this Email"),
> are intended solely for the use of the individual/entity to whom/which they
> are addressed, and may contain confidential and/or legally privileged
> information. This Email may not be disclosed or forwarded to anyone else
> without authorization from the originator of this Email. If you have
> received this Email in error, please notify the sender immediately and
> delete all copies from your system. Please note that the views or opinions
> presented in this Email are those of the author and may not necessarily
> represent those of Saudi Aramco. The recipient should check this Email and
> any attachments for the presence of any viruses. Saudi Aramco accepts no
> liability for any damage caused by any virus/error transmitted by this
> Email.
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
>
> Before posting a message to RadSafe be sure to have read and understood
> the RadSafe rules. These can be found at:
> http://health.phys.iit.edu/radsaferules.html
>
> For information on how to subscribe or unsubscribe and other settings
> visit: http://health.phys.iit.edu
>