[ RadSafe ] Connecting 2x2 NaI to more than one ratemeter simultaneously

[Joseph Shonka]

It would work but are you trying to see differences between the analog R-C circuits that provide smoothing?  If you ( instead) are trying to see differences in the start time of smoothing, why not just interrogate the same rate meter at 4  different times (sequentially). 

Joe Shonka 

Sent from my iPhone

> On Jul 25, 2018, at 10:19 AM, Washingtonia Filifera <w.filifera at gmail.com> wrote:
> 
> Hi:
> 
> I'm a statistics graduate student and I am trying to design an experiment
> that would assess the effect of firmware choice on detection limits for a
> stationary detector / continuously moving source situation. The choice of
> firmware interacts with hardware (the ratemeter) and determines the
> characteristics of the time series data that is sent to a serial port.
> 
> I'm wondering, is it feasible to use cable splitters between a detector and
> two or four ratemeters to send counts simultaneously to each?
> 
> 
> Thank you
> Washingtonia
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
> 
> Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
> 
> For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu