[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Detectors and humidity
----- Forwarded by John Sukosky/NUC/VANCPOWER on 05/28/04 01:05 PM -----
"Joseph J.
Shonka" To: <John_Sukosky@DOM.COM>
<jjshonka@shonka. cc: <JPreisig@AOL.COM>
com> Subject: Detectors and humidity
05/28/04 10:39 AM
Dear John (and Joe):
I am not allowed to look at RADSAFE, since I would waste a good fraction of
the day, but someone forwarded your exchange to me. First things first,
Joe I hope you were talking about someone else J.
John
I don’t think the supply voltage is the issue. Although 3 systems are
correlated with humidity, I think that you could be dealing with more than
one cause with the causes correlated seasonally not the supply voltage.
However, if you are talking about outages with offsite power I may
reconsider voltage.
As for correlated causes, for example, the density of air is reduced with
humidity (I can get you an equation if you like), and that may explain the
increased alpha background as a function of humidity, especially for low
energy alpha. As for the gamma sensitive detectors, Joe Preisig is
correct. If you “in situ gamma spec” one point on earth every day, you
find the equivalent uranium (from Bi-214) is higher in the wet season
because the small fraction of total radon in soil that emanates to air
increases in wet soil. Have you looked at any beta CAMs (that do not have
radon subtraction)? You would need to look at the same time of day (avoid
mid morning, perhaps midafternoon) and look at a few months of winter
versus summer. The radon you measure comes from a location a day or two
“upwind” of you, which may have greater seasonal variation than your
location.
I am not a member of RADSAFE, but you are free to post my hypothesis if you
like.
Regards and good luck,
Joe Shonka
************************************************************************
You are currently subscribed to the Radsafe mailing list. To
unsubscribe, send an e-mail to Majordomo@list.vanderbilt.edu Put the
text "unsubscribe radsafe" (no quote marks) in the body of the e-mail,
with no subject line. You can view the Radsafe archives at
http://www.vanderbilt.edu/radsafe/