RE: Decontamination of metal

[BRZGV@CCMAIL.CECO.COM (Glen Vickers)]

If you know of a solution, please let everyone know.  A tool of such impressive
efficiency would be a great assess to any waste management program at a nuclear
power plant.  The required specs are a tall order!

Sincerely,
Glen

-----Original Message-----
From:     Mike Davidson <DAVIDSON@gtsduratek.com> at INTERNET
Sent:     Thursday, October 01, 1998 3:28 PM
To:     Multiple recipients of list <radsafe@romulus.ehs.uiuc.edu> at INTERNET
Subject:     Decontamination of metal

Dear Radsafers:

Any good leads out there on currently available, effective, (economical?!)
portable decontamination method (paint, bead blast, grit blast, etc.) for heavy
gauge steel plate?  Looking at knocking down 750K d/min/100cm^2 beta-gamma
contamination to releasable in one pass.  Recyclable or low secondary waste
generation is desirable.  Can't use ice blasting for this application.  Respond
off line please.  Thanks

Mike Davidson
GTS Duratek
(410) 312-5121 voice
(410) 290-8154 fax
davidson@gtsduratek.com
Visit our website at www.gtsduratek.com !

************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html <<
File: RFC822.TXT >>
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html