[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Accelerator Vault
Request for Help:
I am trying to locate an accelerator vault for the purpose of testing a new
particle accelerator.
The specs for the vault should be as follows:
1) A minimum of 4 feet of concrete shielding on all sides and ceiling with
inside unobstructed floor space of 38ft x 26ft - or - 8 feet of concrete
shielding on all sides and ceiling with inside unobstructed floor space of
36.3ft x 23ft.
2) All vault penetrations must be properly shielded.
3) The vault must have minimum floor to ceiling clearance of 8ft.
4) The floor must be capable of handling 1200 lbs./sq.ft.
5) Larger floor space may be required depending on the location and type of
vault door used.
6) Access from a loading dock to the vault must allow for transporting
equipment that is 16.5ft long, 4ft wide and 6ft tall. Hallways and door
openings must accommodate these dimensions.
Additional requirements:
1) We would require an equipment room 10ft x 10ft adjacent to the vault.
2) We would require a space for a control room adjacent to the vault with a
minimum space of 10ft x 14ft depending on the location of the doors and
proximity to the vault.
Is there any space like this available?
Please contact:
Dick Patterson
PracSys Corp
Ph: 603 890 8555
Fx: 603 890 8558
e-mail: psc1@concentric.net
Richard J. Patterson
PracSys Corp
8E Industrial Way - Unit 10
Salem, NH 03079
ph: (603) 890 8555; fx: (603) 890 8558
e-mail: psc1@concentric.net
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html