[ RadSafe ] Nureg 0017 help, advice
Pete.Bailey at fpl.com
Thu Sep 9 06:20:09 CDT 2010
What is it (what type of calc) you wish to accomplish ?
. .there may be other codes (XOQDOQ , PAVAN , etc) that will get you where you want to go....
From: radsafe-bounces at health.phys.iit.edu [mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of Richard D. Urban Jr.
Sent: Thursday, September 09, 2010 2:33 AM
To: radsafe at health.phys.iit.edu; rahim.ghanooni at gmail.com
Subject: Re: [ RadSafe ] Nureg 0017 help, advice
try contacting the folks at http://www.hercules-390.org/ to see if they can help you with the original software.
Hercules is an open source emulator software implementation of the System/370, ESA/390 and z/Architecture mainframe architectures. Hercules runs under Windows and Linux, as well as under various other Unix or Unix-like systems on Intel Pentium and other hardware platforms including Alpha, Sparc, and Mac.
On their FAQ page there are are multiple links to obtain the OS360 software as well (FAQ 2.04)
Also see http://en.wikipedia.org/wiki/Hercules_emulator
Being open source, this is all free to use, but implementation probably won't be painless.
Chino Valley, AZ
>From: Rahim Ghanooni <rahim.ghanooni at gmail.com>
>Sent: Sep 8, 2010 12:59 PM
>To: radsafe at health.phys.iit.edu
>Subject: [ RadSafe ] Nureg 0017 help, advice
>> I am using Nureg 0017 to determine the primary and secondary source term
>> for a PWR in accordance with section 2.2.3 input and our parameters. I
>> created a spreadsheet and have no problems.
>> I have some questions on section 2.2.5 “radioactive particulate release in
>> gaseous effluent”.
>> The company tried to purchase the software, which runs on IBM -360, and we
>> have no access to this type of computer.
>> Is there any other software available to perform the same calculations?
>You are currently subscribed to the RadSafe mailing list
>Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
>For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu
You are currently subscribed to the RadSafe mailing list
Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu
More information about the RadSafe