[ RadSafe ] Anyone want to take over the list

[Jeff Terry]

We have dealt with many of those issues and that is why they require the posters name and email to be attached. 

We've monitored the situation on other listservers that have changed there policy and too many messages come with no attribution. 

The problem know is that as more groups adopt the spam blocking standard, we are losing much of the group. 

Jeff

On Aug 17, 2014, at 1:12 PM, Sander Perle <sandyfl at cox.net> wrote:

> This was the concern with both University of Illinois when under Melissa Woo
> and at Vanderbilt under Mike Stabin. Threats of litigation and other
> unbelievable accusations led to their terminating the list server on their
> systems. A real shame!
> 
> Regards,
> 
> Sandy
> Retired, Consultant
> 
> From:  Jeff Terry <terryj at iit.edu>
> Reply-To:  "The International Radiation Protection (Health Physics) Mailing
> List" <radsafe at health.phys.iit.edu>
> Date:  Sunday, August 17, 2014 at 11:01 AM
> To:  "The International Radiation Protection (Health Physics) Mailing List"
> <radsafe at health.phys.iit.edu>
> Subject:  Re: [ RadSafe ] Anyone want to take over the list
> 
> The listserver can support the new standard but the University does not want
> posts not having the posters name and email attached.
> 
> University wants post properly attributed to the poster as opposed to the
> the new standard below:
> 
> Jeff
> 
> 
> The new standard would require all posts to be:
> 
> On Aug 17, 2014, at 12:59 pm, The International Radiation Protection (Health
> Physics) Mailing List <radsafe at health.phys.iit.edu> wrote:
> 
> Blah, Blah, Blah  
> 
> 
> 
> 
> On Aug 17, 2014, at 12:54 PM, Dan McCarn <hotgreenchile at gmail.com> wrote:
> 
>> Can the university support the new standard?
>> 
>> 
>> Dan ii
>> 
>> Dan W McCarn, Geologist
>> 108 Sherwood Blvd
>> Los Alamos, NM 87544-3425
>> +1-505-672-2014 (Home ­ New Mexico)
>> +1-505-670-8123 (Mobile - New Mexico)
>> HotGreenChile at gmail.com (Private email) HotGreenChile at gmail dot com
>> 
>> 
>> On Sun, Aug 17, 2014 at 11:53 AM, Jeff Terry <terryj at iit.edu> wrote:
>> 
>>> Excessive bounces to their email addresses. They must have adopted the
>>> same standard.
>>> 
>>> Jeff
>>> 
>>> 
>>> On Aug 17, 2014, at 12:50 PM, Dan McCarn <hotgreenchile at gmail.com> wrote:
>>> 
>>>> Why the NRC?
>>>> 
>>>> Dan ii
>>>> 
>>>> Dan W McCarn, Geologist
>>>> 108 Sherwood Blvd
>>>> Los Alamos, NM 87544-3425
>>>> +1-505-672-2014 (Home ­ New Mexico)
>>>> +1-505-670-8123 (Mobile - New Mexico)
>>>> HotGreenChile at gmail.com (Private email) HotGreenChile at gmail dot com
>>>> 
>>>> 
>>>> On Sun, Aug 17, 2014 at 11:44 AM, Jeff Terry <terryj at iit.edu> wrote:
>>>> 
>>>>> Hi All,
>>>>> 
>>>>> We lost everyone from the NRC off the list today.
>>>>> 
>>>>> We are not allowed by the University legal department to take
>>>>> responsibility for all list posts by allowing anonymous posting. This is
>>>>> the only current solution to blocking of listerservers by some of the
>>> major
>>>>> internet service providers.
>>>>> 
>>>>> If someone else would like to take over the list and run it using that
>>>>> method, I would be happy to pass the running of the list along.
>>>>> 
>>>>> Otherwise, given the steady decline of membership, it may be time to
>>> just
>>>>> end the list.
>>>>> 
>>>>> Sorry but I don't see another practical solution.
>>>>> 
>>>>> Let me know what you think,
>>>>> 
>>>>> Jeff
>>>>> 
>>>>> _______________________________________________
>>>>> You are currently subscribed to the RadSafe mailing list
>>>>> 
>>>>> Before posting a message to RadSafe be sure to have read and understood
>>>>> the RadSafe rules. These can be found at:
>>>>> http://health.phys.iit.edu/radsaferules.html
>>>>> 
>>>>> For information on how to subscribe or unsubscribe and other settings
>>>>> visit: http://health.phys.iit.edu
>>>>> 
>>>> _______________________________________________
>>>> You are currently subscribed to the RadSafe mailing list
>>>> 
>>>> Before posting a message to RadSafe be sure to have read and understood
>>> the RadSafe rules. These can be found at:
>>> http://health.phys.iit.edu/radsaferules.html
>>>> 
>>>> For information on how to subscribe or unsubscribe and other settings
>>> visit: http://health.phys.iit.edu
>>> 
>>> _______________________________________________
>>> You are currently subscribed to the RadSafe mailing list
>>> 
>>> Before posting a message to RadSafe be sure to have read and understood
>>> the RadSafe rules. These can be found at:
>>> http://health.phys.iit.edu/radsaferules.html
>>> 
>>> For information on how to subscribe or unsubscribe and other settings
>>> visit: http://health.phys.iit.edu
>>> 
>> _______________________________________________
>> You are currently subscribed to the RadSafe mailing list
>> 
>> Before posting a message to RadSafe be sure to have read and understood the
>> RadSafe rules. These can be found at:
>> http://health.phys.iit.edu/radsaferules.html
>> 
>> For information on how to subscribe or unsubscribe and other settings visit:
>> http://health.phys.iit.edu
> 
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
> 
> Before posting a message to RadSafe be sure to have read and understood the
> RadSafe rules. These can be found at:
> http://health.phys.iit.edu/radsaferules.html
> 
> For information on how to subscribe or unsubscribe and other settings visit:
> http://health.phys.iit.edu
> 
> 
> 
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
> 
> Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
> 
> For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu