[ RadSafe ] rad monitor calibration

[Ted de Castro]

I'd say the first stop would be to check the ANSI standard - Google 
"ansi n323a pdf" and you'll find lots of places to get it - apparently 
even free in ebook format - or even maybe the HPS web site.


On 5/30/2014 11:29 AM, JOHN.RICH at sargentlundy.com wrote:
> Can somebody point me to a good (readable) description of the rad monitor
> calibration process.
> What, I need is something that provides a description of how the process
> proceeds, as in:
>
> primary calibration => secondary calibration=> tertiary/transfer
> calibration
>
> Basically our group performs radiation (source) transport,  sensitivity
> and setpoint calculations, but we're just now being asked to answer
> questions related to calibration.  I expect that they can/should be
> referred back to the vendor, but still, we should have a reasonable
> understanding of what's being asked. (We've got a fair amount of "water
> cooler" information, but nothing truly complete.)
> Thx in advance  - - jmr
>
> John Rich
> Sargent & Lundy llc
> 312-269-3768
> _______________________________________________
> You are currently subscribed to the RadSafe mailing list
>
> Before posting a message to RadSafe be sure to have read and understood the RadSafe rules. These can be found at: http://health.phys.iit.edu/radsaferules.html
>
> For information on how to subscribe or unsubscribe and other settings visit: http://health.phys.iit.edu