[ RadSafe ] rad monitor calibration

JOHN.RICH at sargentlundy.com JOHN.RICH at sargentlundy.com
Fri May 30 15:08:19 CDT 2014


Thx for the info.
BTW - - nothing to do with global warming - - just a request for help 
'cause its not good to look stupid in front of management.  ;-)
my contribution to the global warming debate is mostly unsupported hot air 
anyway
jmr
John Rich
312-269-3768



From:   "Don Jordan" <donjordan at ramservicesinc.com>
To:     "'The International Radiation Protection \(Health Physics\) 
Mailing List'" <radsafe at health.phys.iit.edu>
Date:   05/30/2014 02:40 PM
Subject:        Re: [ RadSafe ] rad monitor calibration
Sent by:        radsafe-bounces at health.phys.iit.edu



We measured the field from our calibration source with a 1 L ion chamber
connected to a PTW electrometer.  This instrument had been calibrated by a
secondary standard laboratory and their source (or instrument) was 
compared
to the national standard maintained by NIST in the U.S.  You may want to
consult ANSI Standard N323A-1997 or the ISO equivalent.  But, what does 
this
have to do with global warming?

Don Jordan

donjordan at ramservicesinc.com

RAM Services, Inc.
Voice            +1-920-686-3889
Fax              +1-920-686-3899

510 County Highway V
Two Rivers, Wisconsin            54241
United States of America


-----Original Message-----
From: radsafe-bounces at health.phys.iit.edu
[mailto:radsafe-bounces at health.phys.iit.edu] On Behalf Of
JOHN.RICH at sargentlundy.com
Sent: Friday, May 30, 2014 1:30 PM
To: radsafe at health.phys.iit.edu
Subject: [ RadSafe ] rad monitor calibration

Can somebody point me to a good (readable) description of the rad monitor
calibration process.
What, I need is something that provides a description of how the process
proceeds, as in:

primary calibration => secondary calibration=> tertiary/transfer 
calibration

Basically our group performs radiation (source) transport,  sensitivity 
and
setpoint calculations, but we're just now being asked to answer questions
related to calibration.  I expect that they can/should be referred back to
the vendor, but still, we should have a reasonable understanding of what's
being asked. (We've got a fair amount of "water cooler" information, but
nothing truly complete.) Thx in advance  - - jmr

John Rich
Sargent & Lundy llc
312-269-3768
_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood 
the
RadSafe rules. These can be found at:
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings 
visit:
http://health.phys.iit.edu

_______________________________________________
You are currently subscribed to the RadSafe mailing list

Before posting a message to RadSafe be sure to have read and understood 
the RadSafe rules. These can be found at: 
http://health.phys.iit.edu/radsaferules.html

For information on how to subscribe or unsubscribe and other settings 
visit: http://health.phys.iit.edu



More information about the RadSafe mailing list