RE: Ludlum 43-37 Floor Monitor Procedure

["Cannon, Curt" <Curt.Cannon@atgcusa.com>]

We have a couple of these floor monitors that we use for truck surveys as
well as building routines. We have found the Model 18 from Ludlum to work
good for us if you want to be able to switch voltages. We do not have a
specific procedure for this instrument only a section in our Portable
instrument procedures.
Curt 

> -----Original Message-----
> From:	Rodney Bauman [SMTP:rodney_bauman@wssrap-host.wssrap.com]
> Sent:	Thursday, May 25, 2000 9:19 AM
> To:	Multiple recipients of list
> Subject:	Ludlum 43-37 Floor Monitor Procedure
> 
> 
> I need to create a operation/calibration procedure for a Ludlum 43-37
> floor
> monitor.  I'll probably use the unit in conjunction with Ludlum 2221
> meters (one
> set up for alpha and another set up for beta/gamma).  I would appreciate
> any
> advise or preferably copies of procedures from other users of this or
> similar-type floor monitor.
> 
> Thanks in advance,
> 
> Rodney Bauman, CHP, RRPT
> Weldon Spring Site Remedial Action Project
> rodney_bauman@wssrap-host.wssrap.com
> (636) 441-8086 ext. 4219
> fax: (636) 926-7072
> 
> ************************************************************************
> The RADSAFE Frequently Asked Questions list, archives and subscription
> information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html
************************************************************************
The RADSAFE Frequently Asked Questions list, archives and subscription
information can be accessed at http://www.ehs.uiuc.edu/~rad/radsafe.html