[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AW: Alternatives to lead blankets
I concur w/ Mr. Andrews. Water shields can be very effective for
general areas, obviously not a direct substitute for hanging lead on
pipes.
Matt Williamson
______________________________ Reply Separator _________________________________
Subject: Re: AW: Alternatives to lead blankets
Author: andrewsjp (andrewsjp@chartertn.net) at Internet
Date: 2/5/03 6:38 PM
Franz Schoenhofer wrote:
> -----Ursprüngliche Nachricht-----
>Von: owner-radsafe@list.vanderbilt.edu
>[mailto:owner-radsafe@list.vanderbilt.edu] Im Auftrag von Dave Biela
>Gesendet: Mittwoch, 05. Februar 2003 20:41
>An: radsafe@list.vanderbilt.edu
>Cc: Tom Kocialski
>Betreff: Alternatives to lead blankets
>
>I have been asked to gather data on non-hazardous alternatives to lead
>blankets for gamma shielding. Any input will be appreciated.
>
>
>-------------------------------------------------------------------
>
>Dave,
> I have some problems with your request. Your posting would imply, that lead
>blankets are hazardous. ?????? Very basic radiation protection knowledge
>would show you, that the shielding efficiency depends on the Z of the
>shielding material. Better than lead would of course be uranium, depleted
>uranium available at very low cost. According to the last few years news on
>gulf war syndrome etc. this seems to be a "very dangerous and hazardous
>material". (Sometimes I am cynical...) Maybe you want to use bismuth?
>
>Yes, lead blankets are hazardous if they fall on the feet from great
>heights.
>
>Could you please inform us on your profession and what is the reason to ask
>such a question on RADSAFE?
>
>Franz
>
>
Let me add another caution with lead blankets: When removing them, do
not the laborors pile them up in one place on the grating as happened to
me one time. We did not have the accident we could have if the grating
had given away. The caution applies to all sheilding removal. Water is
often an easy shield to place and remove. I once borrowed a number of
barrels, lined them up and filled them with water, finished my task that
was threatened to be shut down because of the radiation in the adjacent
area, then drained them into the floor drain and returned them as new.
I have also used barrels filled with sand to do temporary shielding.
This was especially useful in an area used for storing hot drums
because we had all the barrel handling equipment available.
John Andrews
Knoxville, Tennessee
John Andrews
************************************************************************
You are currently subscribed to the Radsafe mailing list. To unsubscribe,
send an e-mail to Majordomo@list.vanderbilt.edu Put the text "unsubscribe
radsafe" (no quote marks) in the body of the e-mail, with no subject line.
You can view the Radsafe archives at http://www.vanderbilt.edu/radsafe/
=====================================================================
Please note that this e-mail and any files transmitted with it may be
privileged, confidential, and protected from disclosure under
applicable law. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering this
message to the intended recipient, you are hereby notified that any
reading, dissemination, distribution, copying, or other use of this
communication or any of its attachments is strictly prohibited. If
you have received this communication in error, please notify the
sender immediately by replying to this message and deleting this
message, any attachments, and all copies and backups from your
computer.
************************************************************************
You are currently subscribed to the Radsafe mailing list. To unsubscribe,
send an e-mail to Majordomo@list.vanderbilt.edu Put the text "unsubscribe
radsafe" (no quote marks) in the body of the e-mail, with no subject line.
You can view the Radsafe archives at http://www.vanderbilt.edu/radsafe/